# packages

pkgId: ae9e9ca900dc0c4654100bf7307989d48964ccebb79a3d14b8d913f8b520485c
name: afio
arch: src
version: 2.5
epoch: 0
release: 1.opensuse12.3
summary: Archiver program which writes cpio-format archives
url: http://freshmeat.net/projects/afio/
rpm_license: LGPL
rpm_group: Productivity/Archiving/Backup
rpm_buildhost: linux-zkpz.site
rpm_packager: Bruno Cornec <bruno@project-builder.org>
location_href: afio-2.5-1.opensuse12.3.src.rpm
checksum_type: sha256
description:
  Afio makes cpio-format archives.  It deals somewhat gracefully with
  input data corruption. Supports multi-volume archives during
  interactive operation. Afio can make compressed archives that are
  much safer than compressed tar or cpio archives. Afio is best used as
  an `archive engine' in a backup script.


pkgId: b9a433ab109f3b7e2622047e7b70f01370659336607d80c7ccae40b9c0b18687
name: buffer
arch: src
version: 1.19
epoch: 0
release: 4.opensuse12.3
summary: This program speeds up writing tapes on remote tape drives
url: http://hello-penguin.com/software/buffer
rpm_license: GPL
rpm_group: Productivity/Archiving/Backup
rpm_buildhost: linux-zkpz.site
rpm_packager: Bruno Cornec <bruno@project-builder.org>
location_href: buffer-1.19-4.opensuse12.3.src.rpm
checksum_type: sha256
description:
  This is a program designed to speed up writing tapes on remote tape drives.
  When this program is put "in the pipe", two processes are started.
  One process reads from standard-in and the other writes to standard-out.
  Both processes communicate via shared memory.


pkgId: 9da6c98bc3632b0ebce331fa188ebe39799a8ad31246fd67cc8e1b5fb1c592db
name: mindi
arch: src
version: 2.1.4
epoch: 0
release: 1.opensuse12.3
summary: Mindi creates emergency boot disks/CDs using your kernel, tools and modules
url: http://www.mondorescue.org
rpm_license: GPL
rpm_group: Productivity/Archiving/Backup
rpm_buildhost: linux-zkpz.site
rpm_packager: Bruno Cornec <bruno@mondorescue.org>
location_href: mindi-2.1.4-1.opensuse12.3.src.rpm
checksum_type: sha256
description:
  Mindi takes your kernel, modules, tools and libraries, and puts them on N
  bootable disks (or 1 bootable CD image). You may then boot from the disks/CD
  and do system maintenance - e.g. format partitions, backup/restore data,
  verify packages, etc.
  It is part of the MondoRescue suite for which it creates boot media.
  Homepage: http://www.mondorescue.org


pkgId: 53ac7bfd3d194d6cf1264a0d3e2a65f8630a5f5b776be526099cc143b8c85a01
name: mindi-busybox
arch: src
version: 1.18.5
epoch: 0
release: 3.opensuse12.3
summary: Busybox version suited for Mindi
url: http://www.mondorescue.org
rpm_license: GPL
rpm_group: Productivity/Archiving/Backup
rpm_buildhost: linux-zkpz.site
rpm_packager: Bruno Cornec <bruno@mondorescue.org>
location_href: mindi-busybox-1.18.5-3.opensuse12.3.src.rpm
checksum_type: sha256
description:
  This package provides a busybox version suited for Mindi.
  Mindi is a script to create boot/root disks based on your system.
  It uses Busybox during the restore process to provide a small Unix environement.
  This package prepares busybox the right way for mindi.
  Homepage: http://www.mondorescue.org


pkgId: d5bf81f61c751be2d380bf82363fb113123d214af1f12558909e78d0fa132d4e
name: mondo
arch: src
version: 3.0.3
epoch: 0
release: 1.opensuse12.3
summary: MondoRescue is a GPL Disaster Recovery and Cloning Solution
url: http://www.mondorescue.org
rpm_license: GPL
rpm_group: Productivity/Archiving/Backup
rpm_buildhost: linux-zkpz.site
rpm_packager: Bruno Cornec <bruno@mondorescue.org>
location_href: mondo-3.0.3-1.opensuse12.3.src.rpm
checksum_type: sha256
description:
  MondoRescue is a GPL Disaster Recovery and Cloning solution to create backup media
  (CD, DVD, tape, network images) that can be used to redeploy the
  damaged system, as well as deploy similar or less similar systems.
  MondoRescue is reliable. It backs up your Linux server or workstation to
  tape, CD-R, CD-RW, NFS or hard disk partition. In the event of catastrophic
  data loss, you will be able to restore all of your data [or as much as you
  want], from bare metal if necessary. MondoRescue is in use by numerous blue-chip
  enterprises and large organizations, dozens of smaller companies, and tens of
  thousands of users.
  .
  MondoRescue is comprehensive. MondoRescue supports LVM, RAID, ext2, ext3, JFS, XFS,
  ReiserFS, VFAT, and can support additional file systems easily. It supports
  adjustments in disk geometry, including migration from non-RAID to RAID. MondoRescue
  runs on all major Linux distributions and is getting better all the time. You
  may even use it to backup non-Linux partitions, such as NTFS.
  .
  Homepage: http://www.mondorescue.org


pkgId: 1e27bdeb2e6cf9ce9d0d284f13eeee7e957908c3c2b66fe7ed33d4ebe6501bdc
name: mondo
arch: src
version: 3.0.4
epoch: 0
release: 1.opensuse12.3
summary: MondoRescue is a GPL Disaster Recovery and Cloning Solution
url: http://www.mondorescue.org
rpm_license: GPLv2+
rpm_group: Productivity/Archiving/Backup
rpm_buildhost: linux-zkpz.site
rpm_packager: Bruno Cornec <bruno@mondorescue.org>
location_href: mondo-3.0.4-1.opensuse12.3.src.rpm
checksum_type: sha256
description:
  MondoRescue is a GPL Disaster Recovery and Cloning solution
  to create backup media(CD, DVD, tape, network images) that can be used
  to redeploy the damaged system,
  as well as deploy similar or less similar systems.
  MondoRescue is reliable. It backs up your Linux server or workstation to
  tape, CD-R, CD-RW, NFS or hard disk partition. In the event of catastrophic
  data loss, you will be able to restore all of your data
  [or as much as you want], from bare metal if necessary.
  MondoRescue is in use by numerous blue-chip enterprises and
  large organizations, dozens of smaller companies, and tens of
  thousands of users.
  .
  MondoRescue is comprehensive. MondoRescue supports LVM, RAID, ext2, ext3, ext4
  JFS, XFS, ReiserFS, VFAT, and can support additional file systems easily.
  It supports adjustments in disk geometry, including migration
  from non-RAID to RAID.
  MondoRescue runs on all major Linux distributions
  and is getting better all the time.
  You may even use it to backup non-Linux partitions, such as NTFS.
  .
  Homepage: http://www.mondorescue.org


pkgId: 930e26389a4005804c97748843175f6e0203e2c5be8ee617bdfcaeacf9459733
name: pbmkbm
arch: noarch
version: 0.12.2
epoch: 0
release: 1.opensuse12.3
summary: Project Builder Make Build Media helps providing Custom Bootable Media
url: http://trac.project-builder.org
rpm_license: GPLv2
rpm_group: System/Configuration/Packaging
rpm_buildhost: linux-zkpz
rpm_sourcerpm: pbmkbm-0.12.2-1.opensuse12.3.src.rpm
rpm_packager: Bruno Cornec <bruno@project-builder.org>
location_href: pbmkbm-0.12.2-1.opensuse12.3.noarch.rpm
checksum_type: sha256
description:
  ProjectBuilder Make Build Media aka pbmkbm helps producing
  Bootable media based on the local distribution
  or pointing to another distribution repository


pkgId: 9c1fcbe4ecd05341b3e01363f30f2bf148965149f79112c0ec82cae290d23a17
name: perl-ProjectBuilder
arch: noarch
version: 0.12.2
epoch: 0
release: 1.opensuse12.3
summary: Perl module providing multi-OSes (Linux/Solaris/...) Continuous Packaging
url: http://trac.project-builder.org
rpm_license: GPLv2
rpm_group: System/Configuration/Packaging
rpm_buildhost: linux-zkpz
rpm_sourcerpm: perl-ProjectBuilder-0.12.2-1.opensuse12.3.src.rpm
rpm_packager: Bruno Cornec <bruno@project-builder.org>
location_href: perl-ProjectBuilder-0.12.2-1.opensuse12.3.noarch.rpm
checksum_type: sha256
description:
  ProjectBuilder is a perl module providing set of functions
  to help develop packages for projects and deal
  with different Operating systems (Linux distributions, Solaris, ...).
  It implements a Continuous Packaging approach.


pkgId: 68e6c0ceee4dfa24983934a6dd707cff0a53a6f3655c8d78b12a20d3230adc20
name: project-builder
arch: noarch
version: 0.12.2
epoch: 0
release: 1.opensuse12.3
summary: Project Builder helps providing multi-OSes Continuous Packaging
url: http://trac.project-builder.org
rpm_license: GPLv2
rpm_group: System/Configuration/Packaging
rpm_buildhost: linux-zkpz
rpm_sourcerpm: project-builder-0.12.2-1.opensuse12.3.src.rpm
rpm_packager: Bruno Cornec <bruno@project-builder.org>
location_href: project-builder-0.12.2-1.opensuse12.3.noarch.rpm
checksum_type: sha256
description:
  ProjectBuilder aka pb helps producing packages
  for multiple OSes (Linux distributions, Solaris, ...).
  It does that by minimizing
  the duplication of information required and
  a set a very simple configuration files.
  It implements a Continuous Packaging approach.


pkgId: e1f1ff7c970b72aed6c2c6c71d92967e7c1d8def0e4a8ab00debd07bc7dfc7c8
name: project-builder-server
arch: noarch
version: 0.15.3
epoch: 0
release: 1.opensuse12.3
summary: Perl server providing a REST API for Project-Builder.org Continuous Packaging
url: http://trac.project-builder.org
rpm_license: GPLv2
rpm_group: System/Configuration/Packaging
rpm_buildhost: linux-zkpz.site
rpm_sourcerpm: project-builder-server-0.15.3-1.opensuse12.3.src.rpm
rpm_packager: Bruno Cornec <bruno@project-builder.org>
location_href: project-builder-server-0.15.3-1.opensuse12.3.noarch.rpm
checksum_type: sha256
description:
  project-builder-server is a perl module providing a REST API
  to help using project-builder in a client server mode.


pkgId: 634d8112cb0fdd11752554b4181b9fde98201e3273ad071d3a242b7c8220b898
name: rpmbootstrap
arch: noarch
version: 0.12.2
epoch: 0
release: 1.opensuse12.3
summary: Tool similar to debootstrap for RPM based distributions
url: http://trac.project-builder.org
rpm_license: GPLv2
rpm_group: System/Configuration/Packaging
rpm_buildhost: linux-zkpz
rpm_sourcerpm: rpmbootstrap-0.12.2-1.opensuse12.3.src.rpm
rpm_packager: Bruno Cornec <bruno@project-builder.org>
location_href: rpmbootstrap-0.12.2-1.opensuse12.3.noarch.rpm
checksum_type: sha256
description:
  It helps building a chrooted environment for RPM based distributions
  in a similar way as debootstrap for deb based distributions.


