# packages

pkgId: 287a7ecb3976d5b27523025078582ffdcd1b9fed14ac051e97622623c7fdf6b3
name: afio
arch: src
version: 2.5
epoch: 0
release: 1.opensuse12.2
summary: Archiver program which writes cpio-format archives
url: http://freshmeat.net/projects/afio/
rpm_license: LGPL
rpm_group: Productivity/Archiving/Backup
rpm_buildhost: linux-pmk0
rpm_packager: Bruno Cornec <bruno@project-builder.org>
location_href: afio-2.5-1.opensuse12.2.src.rpm
checksum_type: sha256
description:
  Afio makes cpio-format archives.  It deals somewhat gracefully with
  input data corruption. Supports multi-volume archives during
  interactive operation. Afio can make compressed archives that are
  much safer than compressed tar or cpio archives. Afio is best used as
  an `archive engine' in a backup script.


pkgId: aedd9ff49cf35ede01b0379eedbc8bc8295b409df01189bd915baac2db1f23be
name: buffer
arch: src
version: 1.19
epoch: 0
release: 4.opensuse12.2
summary: This program speeds up writing tapes on remote tape drives
url: http://hello-penguin.com/software/buffer
rpm_license: GPL
rpm_group: Productivity/Archiving/Backup
rpm_buildhost: linux-pmk0
rpm_packager: Bruno Cornec <bruno@project-builder.org>
location_href: buffer-1.19-4.opensuse12.2.src.rpm
checksum_type: sha256
description:
  This is a program designed to speed up writing tapes on remote tape drives.
  When this program is put "in the pipe", two processes are started.
  One process reads from standard-in and the other writes to standard-out.
  Both processes communicate via shared memory.


pkgId: 14d732ef802b93a4656aa301b0b0ca3a41e594b9a53da7cd2b0dce289fd96870
name: mindi
arch: src
version: 2.1.4
epoch: 0
release: 1.opensuse12.2
summary: Mindi creates emergency boot disks/CDs using your kernel, tools and modules
url: http://www.mondorescue.org
rpm_license: GPL
rpm_group: Productivity/Archiving/Backup
rpm_buildhost: linux-pmk0
rpm_packager: Bruno Cornec <bruno@mondorescue.org>
location_href: mindi-2.1.4-1.opensuse12.2.src.rpm
checksum_type: sha256
description:
  Mindi takes your kernel, modules, tools and libraries, and puts them on N
  bootable disks (or 1 bootable CD image). You may then boot from the disks/CD
  and do system maintenance - e.g. format partitions, backup/restore data,
  verify packages, etc.
  It is part of the MondoRescue suite for which it creates boot media.
  Homepage: http://www.mondorescue.org


pkgId: 25b086f4ec27e28981d4fe03277a9c7bf52de5caeb2e60272bf92833509b5556
name: mindi-busybox
arch: src
version: 1.18.5
epoch: 0
release: 3.opensuse12.2
summary: Busybox version suited for Mindi
url: http://www.mondorescue.org
rpm_license: GPL
rpm_group: Productivity/Archiving/Backup
rpm_buildhost: linux-pmk0
rpm_packager: Bruno Cornec <bruno@mondorescue.org>
location_href: mindi-busybox-1.18.5-3.opensuse12.2.src.rpm
checksum_type: sha256
description:
  This package provides a busybox version suited for Mindi.
  Mindi is a script to create boot/root disks based on your system.
  It uses Busybox during the restore process to provide a small Unix environement.
  This package prepares busybox the right way for mindi.
  Homepage: http://www.mondorescue.org


pkgId: 688e6ce0ff634b617626b6301e7e5384b27518825aefe4641e2853bac066a50b
name: mondo
arch: src
version: 3.0.3
epoch: 0
release: 1.opensuse12.2
summary: MondoRescue is a GPL Disaster Recovery and Cloning Solution
url: http://www.mondorescue.org
rpm_license: GPL
rpm_group: Productivity/Archiving/Backup
rpm_buildhost: linux-pmk0
rpm_packager: Bruno Cornec <bruno@mondorescue.org>
location_href: mondo-3.0.3-1.opensuse12.2.src.rpm
checksum_type: sha256
description:
  MondoRescue is a GPL Disaster Recovery and Cloning solution to create backup media
  (CD, DVD, tape, network images) that can be used to redeploy the
  damaged system, as well as deploy similar or less similar systems.
  MondoRescue is reliable. It backs up your Linux server or workstation to
  tape, CD-R, CD-RW, NFS or hard disk partition. In the event of catastrophic
  data loss, you will be able to restore all of your data [or as much as you
  want], from bare metal if necessary. MondoRescue is in use by numerous blue-chip
  enterprises and large organizations, dozens of smaller companies, and tens of
  thousands of users.
  .
  MondoRescue is comprehensive. MondoRescue supports LVM, RAID, ext2, ext3, JFS, XFS,
  ReiserFS, VFAT, and can support additional file systems easily. It supports
  adjustments in disk geometry, including migration from non-RAID to RAID. MondoRescue
  runs on all major Linux distributions and is getting better all the time. You
  may even use it to backup non-Linux partitions, such as NTFS.
  .
  Homepage: http://www.mondorescue.org


pkgId: 03436d6323efe1ed84fddaadacfd4878e0db2e75de27e655e6c3671509c7185d
name: mondo
arch: src
version: 3.0.4
epoch: 0
release: 1.opensuse12.2
summary: MondoRescue is a GPL Disaster Recovery and Cloning Solution
url: http://www.mondorescue.org
rpm_license: GPLv2+
rpm_group: Productivity/Archiving/Backup
rpm_buildhost: linux-pmk0
rpm_packager: Bruno Cornec <bruno@mondorescue.org>
location_href: mondo-3.0.4-1.opensuse12.2.src.rpm
checksum_type: sha256
description:
  MondoRescue is a GPL Disaster Recovery and Cloning solution
  to create backup media(CD, DVD, tape, network images) that can be used
  to redeploy the damaged system,
  as well as deploy similar or less similar systems.
  MondoRescue is reliable. It backs up your Linux server or workstation to
  tape, CD-R, CD-RW, NFS or hard disk partition. In the event of catastrophic
  data loss, you will be able to restore all of your data
  [or as much as you want], from bare metal if necessary.
  MondoRescue is in use by numerous blue-chip enterprises and
  large organizations, dozens of smaller companies, and tens of
  thousands of users.
  .
  MondoRescue is comprehensive. MondoRescue supports LVM, RAID, ext2, ext3, ext4
  JFS, XFS, ReiserFS, VFAT, and can support additional file systems easily.
  It supports adjustments in disk geometry, including migration
  from non-RAID to RAID.
  MondoRescue runs on all major Linux distributions
  and is getting better all the time.
  You may even use it to backup non-Linux partitions, such as NTFS.
  .
  Homepage: http://www.mondorescue.org


pkgId: 9afd539557622cfdf6cd2ca1215dc05fe6c1f8e5ca17f60213ce97e052e799c7
name: pbmkbm
arch: noarch
version: 0.12.2
epoch: 0
release: 1.opensuse12.2
summary: Project Builder Make Build Media helps providing Custom Bootable Media
url: http://trac.project-builder.org
rpm_license: GPLv2
rpm_group: System/Configuration/Packaging
rpm_buildhost: linux-pmk0
rpm_sourcerpm: pbmkbm-0.12.2-1.opensuse12.2.src.rpm
rpm_packager: Bruno Cornec <bruno@project-builder.org>
location_href: pbmkbm-0.12.2-1.opensuse12.2.noarch.rpm
checksum_type: sha256
description:
  ProjectBuilder Make Build Media aka pbmkbm helps producing
  Bootable media based on the local distribution
  or pointing to another distribution repository


pkgId: a51fe569b958a5cad6d045cc5b7e201f5b86e82fbf18f29ff46a79564bd9d890
name: perl-ProjectBuilder
arch: noarch
version: 0.12.2
epoch: 0
release: 1.opensuse12.2
summary: Perl module providing multi-OSes (Linux/Solaris/...) Continuous Packaging
url: http://trac.project-builder.org
rpm_license: GPLv2
rpm_group: System/Configuration/Packaging
rpm_buildhost: linux-pmk0
rpm_sourcerpm: perl-ProjectBuilder-0.12.2-1.opensuse12.2.src.rpm
rpm_packager: Bruno Cornec <bruno@project-builder.org>
location_href: perl-ProjectBuilder-0.12.2-1.opensuse12.2.noarch.rpm
checksum_type: sha256
description:
  ProjectBuilder is a perl module providing set of functions
  to help develop packages for projects and deal
  with different Operating systems (Linux distributions, Solaris, ...).
  It implements a Continuous Packaging approach.


pkgId: cc13aae7aa2aa9540075acbcef323e72f2b2e08b9db2951eb8775680aa42850f
name: project-builder
arch: noarch
version: 0.12.2
epoch: 0
release: 1.opensuse12.2
summary: Project Builder helps providing multi-OSes Continuous Packaging
url: http://trac.project-builder.org
rpm_license: GPLv2
rpm_group: System/Configuration/Packaging
rpm_buildhost: linux-pmk0
rpm_sourcerpm: project-builder-0.12.2-1.opensuse12.2.src.rpm
rpm_packager: Bruno Cornec <bruno@project-builder.org>
location_href: project-builder-0.12.2-1.opensuse12.2.noarch.rpm
checksum_type: sha256
description:
  ProjectBuilder aka pb helps producing packages
  for multiple OSes (Linux distributions, Solaris, ...).
  It does that by minimizing
  the duplication of information required and
  a set a very simple configuration files.
  It implements a Continuous Packaging approach.


pkgId: 1e8de3f654b7a1f87a2d30994cef0768c3af7de7ed227a4e218e40fe9d862564
name: rpmbootstrap
arch: noarch
version: 0.12.2
epoch: 0
release: 1.opensuse12.2
summary: Tool similar to debootstrap for RPM based distributions
url: http://trac.project-builder.org
rpm_license: GPLv2
rpm_group: System/Configuration/Packaging
rpm_buildhost: linux-pmk0
rpm_sourcerpm: rpmbootstrap-0.12.2-1.opensuse12.2.src.rpm
rpm_packager: Bruno Cornec <bruno@project-builder.org>
location_href: rpmbootstrap-0.12.2-1.opensuse12.2.noarch.rpm
checksum_type: sha256
description:
  It helps building a chrooted environment for RPM based distributions
  in a similar way as debootstrap for deb based distributions.


