# packages

pkgId: f2dd0feb11c8b33a486f05792771eda90cacf6698306c833214d62ef2edea927
name: afio
arch: src
version: 2.5
epoch: 0
release: 1.opensuse10.3
summary: Archiver program which writes cpio-format archives
url: http://freshmeat.net/projects/afio/
rpm_license: LGPL
rpm_group: Productivity/Archiving/Backup
rpm_buildhost: linux-rlrl.site
rpm_packager: Bruno Cornec <bruno@project-builder.org>
location_href: afio-2.5-1.opensuse10.3.src.rpm
checksum_type: sha256
description:
  Afio makes cpio-format archives.  It deals somewhat gracefully with
  input data corruption. Supports multi-volume archives during
  interactive operation. Afio can make compressed archives that are
  much safer than compressed tar or cpio archives. Afio is best used as
  an `archive engine' in a backup script.


pkgId: c489f2b11750b35d2c6617cb6f3bd899501f9eefb7c8e5c25ae4ada402312ae1
name: buffer
arch: src
version: 1.19
epoch: 0
release: 4.opensuse10.3
summary: This program speeds up writing tapes on remote tape drives
url: http://hello-penguin.com/software/buffer
rpm_license: GPL
rpm_group: Productivity/Archiving/Backup
rpm_buildhost: linux-rlrl.site
rpm_packager: Bruno Cornec <bruno@project-builder.org>
location_href: buffer-1.19-4.opensuse10.3.src.rpm
checksum_type: sha256
description:
  This is a program designed to speed up writing tapes on remote tape drives.
  When this program is put "in the pipe", two processes are started.
  One process reads from standard-in and the other writes to standard-out.
  Both processes communicate via shared memory.


pkgId: a9600bfd4b66bbfd6ca64d362bc01325ffc0bc1c4380eaef95173b7dcf3aea04
name: mindi
arch: src
version: 2.1.1
epoch: 0
release: 1.opensuse10.3
summary: Mindi creates emergency boot disks/CDs using your kernel, tools and modules
url: http://www.mondorescue.org
rpm_license: GPL
rpm_group: Productivity/Archiving/Backup
rpm_buildhost: linux-rlrl.site
rpm_packager: Bruno Cornec <bruno@mondorescue.org>
location_href: mindi-2.1.1-1.opensuse10.3.src.rpm
checksum_type: sha256
description:
  Mindi takes your kernel, modules, tools and libraries, and puts them on N
  bootable disks (or 1 bootable CD image). You may then boot from the disks/CD
  and do system maintenance - e.g. format partitions, backup/restore data,
  verify packages, etc.
  It is part of the MondoRescue suite for which it creates boot media.
  Homepage: http://www.mondorescue.org


pkgId: 7b84a74d7f356a96e963fc5a175210bcf3d2e9d7d7f00a07a1fa727e9dc5467d
name: mindi-busybox
arch: src
version: 1.18.5
epoch: 0
release: 2.opensuse10.3
summary: PBUMMARY
url: http://www.mondorescue.org
rpm_license: GPL
rpm_group: Productivity/Archiving/Backup
rpm_buildhost: linux-rlrl.site
rpm_packager: Bruno Cornec <bruno@mondorescue.org>
location_href: mindi-busybox-1.18.5-2.opensuse10.3.src.rpm
checksum_type: sha256
description:
  This package provides a busybox version suited for Mindi.
  Mindi is a script to create boot/root disks based on your system.
  It uses Busybox during the restore process to provide a small Unix environement.
  This package prepares busybox the right way for mindi.
  Homepage: http://www.mondorescue.org


pkgId: 620e13dabc474ddcc1eb0e1c5ef3e1381fdb320ecf64feaa99d04e0ef1fd9244
name: mondo
arch: src
version: 3.0.1
epoch: 0
release: 1.opensuse10.3
summary: MondoRescue is a GPL Disaster Recovery and Cloning Solution
url: http://www.mondorescue.org
rpm_license: GPL
rpm_group: Productivity/Archiving/Backup
rpm_buildhost: linux-rlrl.site
rpm_packager: Bruno Cornec <bruno@mondorescue.org>
location_href: mondo-3.0.1-1.opensuse10.3.src.rpm
checksum_type: sha256
description:
  MondoRescue is a GPL Disaster Recovery and Cloning solution to create backup media
  (CD, DVD, tape, network images) that can be used to redeploy the
  damaged system, as well as deploy similar or less similar systems.
  MondoRescue is reliable. It backs up your Linux server or workstation to
  tape, CD-R, CD-RW, NFS or hard disk partition. In the event of catastrophic
  data loss, you will be able to restore all of your data [or as much as you
  want], from bare metal if necessary. MondoRescue is in use by numerous blue-chip
  enterprises and large organizations, dozens of smaller companies, and tens of
  thousands of users.
  .
  MondoRescue is comprehensive. MondoRescue supports LVM, RAID, ext2, ext3, JFS, XFS,
  ReiserFS, VFAT, and can support additional file systems easily. It supports
  adjustments in disk geometry, including migration from non-RAID to RAID. MondoRescue
  runs on all major Linux distributions and is getting better all the time. You
  may even use it to backup non-Linux partitions, such as NTFS.
  .
  Homepage: http://www.mondorescue.org


pkgId: 897d7137a3cd859f37b327f9a101ba43d350df28125b08a464ba851dd35d4b08
name: mondo
arch: src
version: 3.0.4
epoch: 0
release: 1.opensuse10.3
summary: MondoRescue is a GPL Disaster Recovery and Cloning Solution
url: http://www.mondorescue.org
rpm_license: GPLv2+
rpm_group: Productivity/Archiving/Backup
rpm_buildhost: linux-rlrl.site
rpm_packager: Bruno Cornec <bruno@mondorescue.org>
location_href: mondo-3.0.4-1.opensuse10.3.src.rpm
checksum_type: sha256
description:
  MondoRescue is a GPL Disaster Recovery and Cloning solution
  to create backup media(CD, DVD, tape, network images) that can be used
  to redeploy the damaged system,
  as well as deploy similar or less similar systems.
  MondoRescue is reliable. It backs up your Linux server or workstation to
  tape, CD-R, CD-RW, NFS or hard disk partition. In the event of catastrophic
  data loss, you will be able to restore all of your data
  [or as much as you want], from bare metal if necessary.
  MondoRescue is in use by numerous blue-chip enterprises and
  large organizations, dozens of smaller companies, and tens of
  thousands of users.
  .
  MondoRescue is comprehensive. MondoRescue supports LVM, RAID, ext2, ext3, ext4
  JFS, XFS, ReiserFS, VFAT, and can support additional file systems easily.
  It supports adjustments in disk geometry, including migration
  from non-RAID to RAID.
  MondoRescue runs on all major Linux distributions
  and is getting better all the time.
  You may even use it to backup non-Linux partitions, such as NTFS.
  .
  Homepage: http://www.mondorescue.org


pkgId: 5a9557473dec0802059732461491f26d86721e4276f794da3c1cff31d0c9ecad
name: pbmkbm
arch: noarch
version: 0.12.1
epoch: 0
release: 1.opensuse10.3
summary: Project Builder Make Build Media helps providing Custom Bootable Media
url: http://trac.project-builder.org
rpm_license: GPLv2
rpm_group: System/Configuration/Packaging
rpm_buildhost: linux-rlrl.site
rpm_sourcerpm: pbmkbm-0.12.1-1.opensuse10.3.src.rpm
rpm_packager: Bruno Cornec <bruno@project-builder.org>
location_href: pbmkbm-0.12.1-1.opensuse10.3.noarch.rpm
checksum_type: sha256
description:
  ProjectBuilder Make Build Media aka pbmkbm helps producing
  Bootable media based on the local distribution
  or pointing to another distribution repository


pkgId: 3f1439db3e19c7c875337bfec0fa3ffea2fd81bccc9682a57cf19ea25ad47b08
name: perl-ProjectBuilder
arch: noarch
version: 0.12.1
epoch: 0
release: 1.opensuse10.3
summary: Perl module providing multi-OSes (Linux/Solaris/...) Continuous Packaging
url: http://trac.project-builder.org
rpm_license: GPLv2
rpm_group: System/Configuration/Packaging
rpm_buildhost: linux-rlrl.site
rpm_sourcerpm: perl-ProjectBuilder-0.12.1-1.opensuse10.3.src.rpm
rpm_packager: Bruno Cornec <bruno@project-builder.org>
location_href: perl-ProjectBuilder-0.12.1-1.opensuse10.3.noarch.rpm
checksum_type: sha256
description:
  ProjectBuilder is a perl module providing set of functions
  to help develop packages for projects and deal
  with different Operating systems (Linux distributions, Solaris, ...).
  It implements a Continuous Packaging approach.


pkgId: def90a2cc83701acb3e1e2923fa48b269c30a20356a56c6a3f98dabbafe869ef
name: project-builder
arch: noarch
version: 0.12.2
epoch: 0
release: 1.opensuse10.3
summary: Project Builder helps providing multi-OSes Continuous Packaging
url: http://trac.project-builder.org
rpm_license: GPLv2
rpm_group: System/Configuration/Packaging
rpm_buildhost: linux-rlrl.site
rpm_sourcerpm: project-builder-0.12.2-1.opensuse10.3.src.rpm
rpm_packager: Bruno Cornec <bruno@project-builder.org>
location_href: project-builder-0.12.2-1.opensuse10.3.noarch.rpm
checksum_type: sha256
description:
  ProjectBuilder aka pb helps producing packages
  for multiple OSes (Linux distributions, Solaris, ...).
  It does that by minimizing
  the duplication of information required and
  a set a very simple configuration files.
  It implements a Continuous Packaging approach.


pkgId: b1b491e82d78d383f30205554c03dd5d0be714996fc10fd1d39fe9e435c15e6d
name: project-builder-server
arch: noarch
version: 0.15.3
epoch: 0
release: 1.opensuse10.3
summary: Perl server providing a REST API for Project-Builder.org Continuous Packaging
url: http://trac.project-builder.org
rpm_license: GPLv2
rpm_group: System/Configuration/Packaging
rpm_buildhost: linux-rlrl.site
rpm_sourcerpm: project-builder-server-0.15.3-1.opensuse10.3.src.rpm
rpm_packager: Bruno Cornec <bruno@project-builder.org>
location_href: project-builder-server-0.15.3-1.opensuse10.3.noarch.rpm
checksum_type: sha256
description:
  project-builder-server is a perl module providing a REST API
  to help using project-builder in a client server mode.


pkgId: 7dc7d14908d5706bf70268e41c169a9adec15b1efb9190bd4ebfd9bcebfa1327
name: rpmbootstrap
arch: noarch
version: 0.12.1
epoch: 0
release: 1.opensuse10.3
summary: Tool similar to debootstrap for RPM based distributions
url: http://trac.project-builder.org
rpm_license: GPLv2
rpm_group: System/Configuration/Packaging
rpm_buildhost: linux-rlrl.site
rpm_sourcerpm: rpmbootstrap-0.12.1-1.opensuse10.3.src.rpm
rpm_packager: Bruno Cornec <bruno@project-builder.org>
location_href: rpmbootstrap-0.12.1-1.opensuse10.3.noarch.rpm
checksum_type: sha256
description:
  It helps building a chrooted environment for RPM based distributions
  in a similar way as debootstrap for deb based distributions.


